In this 2 part episode of DIY Guitar Making, I demonstrate my process for connecting the various purfling miters along the soundboard, the backplate, the backstripe, the side purfling, and the endwedge. Included are several tips for cutting binding channels, installing end wedges, repairing gaps and readout.
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course “Building an OM Acoustic”: https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 See Eric’s Available Instruments: https://www.ericschaeferguitars.com/available-instruments/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/